E-mail : email@example.com
SUNKON(CGTECH) Produce High Quality Glass Machinery since 2008
■ Glass washing machine is used for the flat glass washing and drying. It’s a necessary equipment for glass processing enterprise. Have complete section; include common glass, coated glass and LOW-E glass section. Washing and drying part can overall lifting, have digital display, also can according to customer requirement for decide.
■ The machine adopts horizontal structure, put the flat glass on the transfer roller, through entrance part---- washing part (two-stage washing) ---- water absorption part---- drying part (with 22kw drying machine) ---- exit part. Equip the Pneumatic lift sliding table can transfer speediness.
■ Glass transfer speed can reach to stepless speed adjustment according to the processing requirement. And we can adjust the glass with different thickness by using hand wheel and spring screw.
Main technical Parameter
CGQ-2500 glass washing machine
Max. glass width
Min.glass size (L×W)
27Kw (drying machine 22kw)
Overall size (L×W×H)
Washing machine main spare part brand
adopt Chantong brand
adopt Guangyi brand
Adopt Xingguang brand
adopt HRE brand
adopt CHINT brand
adopt Hengda brand
■ Transfer rubber covered roller adopt gear revolve, stable and convenience maintain, the above and bottom hairbrush roller adopt two motors for transfer motion, stable transfer, the belt are durability.
■ The machine top part equip the stainless water dish, transfer rubber covered roller can clean by itself at the revolve process; also with the sprinkler systems can wetting the glass surface before the glass enter the washing part, improve the washing effect.
■ The metal parts of the washing section which are contact with water, all adopt stainless material, with circulating pump, water tank can pull out washing, have three levels washing, when request the higher washing effect, two sets of hairbrush roller at behind have to use running water(purified water can get the better effect). Machine transmission are adopt vulcanized rubber cover roller structure (prohibit acidic liquid get in touch), washing part, drying part whole lifting automatically, the maximum lift range is 400mm, in order to adapt washing different glass thickness, continence for cleaning and replace the hairbrush.
■ Equip 3pairs of hairbrush roller(φ150mm), can washing the hard LOW-E glass, common coated glass and sunshine coated glass, when washing the coated glass, two pairs of strong hairbrush can though the air cylinder raise up, will never hurt the coated surface.
■ Drying part, air drying system equip two pairs of air knife, a pair of straight air knife and skew air knife cooperate application, high pressure blower can completely drying the glass surface, large lateral wind power, good air drying effect.(two cold wind air knife, no need to heat). Keep after washing product can meet the requirement of the drying level, the upper air knife through controlling system adjust lifting, inside maximum opening width is 400mm, is convenience to adjust the air knife height and degrees, improve the drying effect. Equip high pressure blower 22kw, air intake through air filtering, large wind power, good drying effect, whole bellower is install on the top of the drying part, follow the washing and drying part lifting automatically, to ensure the after washing products can meet the requirement of the drying level.
■ The machine frame and others sheet metal parts which are not touching water, spray the senior mechanical paint after through the special technology processing. The paint with strong adhesion, bright durable surface.
Now contact us for order via this sheet, to get more free spare parts or discount!